| The QAGM16V60A is a fully automatic 16 volt charger with a 60 amp max output for charging almost every type of battery,
Starting, AGM, Deep Cycle, Sealed, Wet Cell. With a 60 amp maximum output, the QAGM16V60A provides fast charge recovery between
rounds of competition and will shut off automatically once the battery reaches full charge. This charger was designed around the
needs of the Audio community but can be use in any industry requiring a powerful 16 volt charger with 60 amps. This could be the last charger you'll ever need. The use of a three stage
charge cycle, bulk, absorption and float to accommodate the latest and the oldest 16 volt battery types.
The QAGM16V60A charger brings the battery up to the float voltage which triggers a three hour timmer. Then the battery is allowed to gas to a maximum of 2.4 volts per cell before dropping into a low volt mode of 2.26 volts per cell where the charge is maintained in the batteries indefinitely. The finish current is below 1 amp.
The QAGM16V60A 16 volt charger is designed for use with the TurboStart 16 Volt AGM Series sealed, maintenance free battery types (battery part# S16V, S16A) and the TurboStart 16 volt dry charged acid type battery (battery part# 16V24).
A current controlled fan runs only when charger is under load, and the slim portable case makes it easy to pack for travel, or to compartmentalize.
Features:
o No Power in the charge leads until connected to the batteries
o No Arcing at the charge leads even when shorted together
o Polarity protection to prevent from charging batteries incorrectly
o No overcharging of batteries. Voltage limited
o Current limited to protect against DC overloads
o 100% copper transformer & heavy duty rectifiers
o Heavy Duty 200 amp clamps connect to battery
o Ammeter shows actual current flow, no guessing with LED's
o 3 Year Warranty
Back to 16 Volt Chargers |
